For Grand Theft Auto 6 on PS5, start with Partial targeting, Run movement, larger map icons, and reduced camera shake.
The game runs at 30fps and does not offer an in-game Performance or Quality mode. The most useful adjustments focus on aiming, navigation, and comfort, with separate console settings for your display and headphones. Use the sensitivity values below as a starting preset, not a requirement. Your controller's condition, your preferred camera speed, and your distance from the screen should guide the final adjustments.
Set up your PS5 display and headphones
Check video output before changing the game
Open the PS5 system menu, then go to Settings > Screen and Video > Video Output. These options control the console's output and compatibility with your television.
| PS5 setting | Recommended choice | What it does |
|---|---|---|
| HDR | On When Supported | Uses HDR for compatible content without forcing it onto everything |
| Adjust HDR | Complete the calibration | Matches the console's HDR output to your display |
| 120 Hz Output | Automatic on a compatible display | Allows supported games to use a 120Hz output signal |
| VRR | Automatic if supported | Enables variable refresh rate where compatible |
| ALLM | Automatic if supported | Lets a compatible TV switch into its low-latency game mode |
Enable HDR for the television's connected HDMI input before running calibration. If the TV has HGiG, enable it first to avoid adding another layer of tone mapping. Follow the calibration prompts in your usual room lighting; the Grand Theft Auto 6 TV settings guide covers the display-side adjustments that accompany this console setup.
A higher output refresh rate does not make the game render more frames. Leave Apply to Unsupported Games alone as a starting point instead of treating forced VRR as a guaranteed improvement.
Set up headphone audio
With headphones connected, open Settings > Sound > 3D Audio (Headphones). Enable headphone 3D audio, then use Create Personalized 3D Audio Profile and follow the listening prompts. Enable Apply Personalized 3D Audio Profile afterward. You can also use the console's preset profiles if you prefer to skip personalization.
Start with a manageable controller preset
Choose your layout before adjusting the rest of these Grand Theft Auto 6 controller settings: Default uses L3 to run, while Classic moves running to X. Preview the layout across on-foot movement, aiming, and driving before committing to it.
Separate looking from aiming
Use faster look sensitivity to turn the camera, while keeping aimed movement more restrained. This preset leaves acceleration unchanged so you can judge sensitivity without several other changes affecting the result.
| Controller setting | Starting choice | Adjustment to make next |
|---|---|---|
| Horizontal Look Sensitivity | 9 | Lower it if camera turns overshoot |
| Vertical Look Sensitivity | 9 | Lower it if looking up and down feels difficult to control |
| Horizontal Aim Sensitivity | 7 | Adjust after checking small corrections while aiming |
| Vertical Aim Sensitivity | 7 | Adjust separately if vertical corrections feel awkward |
| Look Acceleration | Default | Increase it if the camera takes too long to reach its turning speed |
| Aim Acceleration | Default | Change it only after settling on aim sensitivity |
| Aim Response Curve | Standard | Try Linear if you want responsiveness that matches stick input directly |
| Touch Pad Button | Map | Keeps the map one press away |
Acceleration controls how quickly the camera reaches its highest movement speed. Increasing sensitivity and acceleration together can make it difficult to identify which change caused an overshoot.
The touchpad does not need to handle camera cycling. You can hold D-pad Down and press Square to change the camera while preserving direct map access.
Adjust deadzones and DualSense feedback individually
A smaller deadzone registers smaller stick movements, but it can also expose stick drift. Reduce each stick's deadzone gradually, release the stick, and check for unwanted movement. Raise the value again if your character or camera moves without input.
Keep adaptive trigger resistance enabled if you enjoy physical feedback while shooting and driving. Lower Vibration & Haptics Strength if the feedback becomes distracting. Trigger resistance, trigger vibration, and general haptics are comfort choices, not frame-rate settings.
Choose targeting and movement assistance
Use Partial targeting as the balanced starting point
Targeting controls whether aiming moves toward or locks onto a nearby target. Aim Assist Strength is separate: it slows reticle movement while aiming at a target. Start that strength at 4, then lower it if corrections feel too restricted.
| Targeting option | How it behaves | Choose it when you want |
|---|---|---|
| Lock-On | Attempts to lock onto the nearest target | The strongest help acquiring a target |
| Partial | Moves aiming toward a nearby target without locking on | Acquisition help with room for manual corrections |
| Free Aim | Never locks onto a target | Manual target acquisition |
Free Aim does not require you to disable aim-assist slowdown. You can select targets yourself while retaining assistance once the reticle reaches them.
Keep these combat helpers enabled initially:
- Shooting Assist helps track close-range targets.
- Drive-by Assist auto-aims toward nearby targets when firing while driving.
- Quick Draw draws your last equipped weapon when you use L2 and press R2. If you carry two longarms, it draws the off-hand weapon instead.
Reduce extra movement inputs
Set Movement Speed and Combat Movement Speed to Run. Fully pushing the left stick then produces a run without a separate run-button input. Smaller stick movements still let you walk, and sprinting remains a separate action.
Keep off. Enabling it automatically stands your character up when you activate sprint from a crouch, which can expose you during stealth.
Make the HUD easier to read
The UI menu has separate controls for text, map symbols, minimap symbols, and in-world markers. Increase the elements you struggle to identify instead of enlarging everything indiscriminately.
| UI setting | Recommended starting choice | Benefit or trade-off |
|---|---|---|
| UI Text Size | Medium | Makes text, icons, and button prompts easier to read |
| Map Blip Size | Large | Makes map icons easier to identify |
| Minimap Blip Size | Large | Enlarges symbols on the minimap |
| In-World Marker Size | Large | Enlarges world markers and compass blips |
| Minimap | On | Keeps it visible outside cinematic moments and cutscenes |
| Subtitles | On | Includes dialogue outside story-critical moments |
| Speaker Names | On | Identifies the character speaking in subtitles and captions |
| Street Names | On | Displays the street name when you enter another street |
| Projectile Arc | Always On | Displays the trajectory when aiming a throwable |
Choose Dynamic for the minimap if you prefer it to disappear between relevant gameplay situations. Choose Mission Only for subtitles if ambient dialogue makes the screen too busy.
Keep route guidance and door markers enabled while learning the map. These Grand Theft Auto 6 console settings for aiming, driving, and visibility help you decide which navigation aids to keep as you reduce HUD clutter.
Reduce camera movement and audio distractions
Use a higher camera and fewer motion effects
In Camera, start with Height (On Foot) set to High and Height (All Vehicles) at 3. These change the camera's position; they are not a substitute for a field-of-view setting.
For a steadier image, try this comfort preset:
- Set Motion Blur Strength to 0 under Display.
- Set Camera Shake and Camera Bob to 0 under Camera.
- Disable Weapon Sway if movement while aiming bothers you.
- Enable Persistent Center Dot under UI if a fixed screen reference helps you feel more comfortable.
Motion blur changes how movement looks, so compare the same camera turn with it enabled and disabled before settling on a choice. Lowering it does not unlock a higher frame-rate mode.
Keep dialogue and navigation audible
Enable Tinnitus Reduction to reduce ringing effects after explosions. If dialogue is difficult to hear, lower music volume slightly before changing the master volume.
The controller speaker can play police radio, phone, GPS, and some minigame audio. Turn it off if you want those sounds kept away from the controller; this option is unavailable while using headphones.
Enable Mute Licensed Music when recording or streaming if you want licensed tracks muted. For ordinary play, leave it disabled to retain that music. Vehicle Radio can separately start off whenever you enter a vehicle.
Adjust accessibility and difficulty deliberately
Use Tap Assist to reduce repeated button presses. It can multiply a single press or replace tapping with holding. Fishing can also use a hold input, while Nitrous can use a press instead of requiring you to hold the button. Simplified Mini Games reduces the interactions needed for activities such as exercising, hotwiring, and basketball.
Set Auto Drive to Restricted as the starting choice. It works through the cinematic camera and is limited to safe scenarios. Unrestricted permits it in less-safe situations that may lead to collisions.
Leave those two options off if you want to preserve the standard challenge. Enable Accessible Combat to reduce enemy health and damage taken by your character, or Reduced Vehicle Damage to make your vehicle take less damage. Neither option needs to be enabled to use the input and readability adjustments above.
Finish by changing one setting at a time and repeating the same short drive, camera turn, or aimed shot. Keep the adjustment only when it solves the problem you were trying to fix.





